### Switch Redesign The switch didn't fit right, so I had to redesign the footprint. This was a great opportunity to try the paper check trick ![[Pasted image 20250407080327.png]] #### Notes 9x3.5 body on calipers Three pins, the center of the left pin and the center of the right pin are 5mm apart. The pins are 0.5mm thick. The pad is flat/flush 1.0mm away from the body. The flush length of the pin is about 1.25mm long Putting this together #### Final Measures Body: 9 x 3.5 Pins: 0.5 x 1.5 Pin Pitch: 2.5mm Pin Offset: 1.0mm Pin Side Distance: 1+3.5+1+1.5 = 7 #### New Switch Footprint ![[Pasted image 20250407080437.png]]